Abstract

This document describes the `BGVAR`

library to estimate Bayesian Global vector autoregressions (GVAR) with different prior specifications and stochastic volatility. The library offers a fully fledged toolkit to conduct impulse response functions, forecast error variance and historical error variance decompositions. To identify structural shocks in a given country model or joint regional shocks, the library offers simple Cholesky decompositions, generalized impulse response functions and zero and sign restrictions – the latter which can also be put on the cross-section. We also allow for different structures of the GVAR like including different weights for different variables or setting up additional country models that determine global variables such as oil prices. Last, we provide functions to conduct and evaluate out-of-sample forecasts as well as conditional forecasts that allow to set a future path for a particular variable of interest. The toolbox requires `R>=3.5`

.

This vignette describes the BGVAR package that allows to estimate Bayesian global vector autoregressions (GVARs). The focus of the vignette is to provide a range of examples that demonstrate the full functionality of the library. It is accompanied by a more technical description of the GVAR framework. Here, it suffices to briefly summarize the main idea of a GVAR, which is a large system of equations designed to analyze or control for interactions across units. Most often, these units refer to countries and the interactions between them arise through economic and financial interdependencies. Also in this document, the examples we provide contain cross-country data. In principle, however, the GVAR framework can be applied to other units, such as regions, firms, etc. The following examples show how the GVAR can be used to either estimate spillover effects from one country to another, or alternatively, to look at the effects of a domestic shock controlling for global factors.

In a nutshell, the GVAR consists of two stages. In the first, \(N\) vector autoregressive (VAR) models are estimated, one per unit. Each equation in a unit model is augmented with foreign variables, that control for global factors and allow to link the unit-specific models later. Typically, these foreign variables are constructed using exogenous, bilateral weights, stored in an \(N \times N\) weight matrix. The classical framework of Pesaran, Schuermann, and Weiner (2004) and Dees et al. (2007) proposes estimating these country models in vector error correction form, while in this package we take a Bayesian stance and estimation is carried out using VARs. The user can transform the data prior estimation into stationary form or estimate the model in levels. The `BGVAR`

package also allows to include a trend to get trend-stationary data. In the second step, the single country models are combined using the assumption that single models are linked via the exogenous weights, to yield a global representation of the model. This representation of the model is then used to carry out impulse response analysis and forecasting.

This vignette consists of four blocks: getting started and data handling, estimation, structural analysis and forecasting. In the next part, we discuss which data formats the `bgvar`

library can handle. We then proceed by showing examples of how to estimate a model using different Bayesian shrinkage priors – for references see Crespo Cuaresma, Feldkircher, and Huber (2016) and Feldkircher and Huber (2016). We also discuss how to run diagnostic and convergence checks and examine the main properties of the model. In the third section, we turn to structural analysis, either using recursive (Cholesky) identification or sign restrictions. We will also discuss structural and generalized forecast error variance decompositions and historical decompositions. In the last section, we show how to compute unconditional and conditional forecasts with the package.

We start by installing the package from CRAN and attaching it with

To ensure reproducibility of the examples that follow, we have set a particular seed (for `R`

s random number generator). As every `R`

library, the `BGVAR`

package provides built-in help files which can be accessed by typing `?`

followed by the function / command of interest. It also comes along with four example data sets, two of them correspond to data the quarterly data set used in Feldkircher and Huber (2016) (`eerData`

, `eerDataspf`

), one is on monthly frequency (`monthlyData`

). For convenience we also include the data that come along with the Matlab GVAR toolbox of Smith, L.V. and Galesi, A. (2014), `pesaranData`

. We include the 2016 vintage (Mohaddes, K. and Raissi, Mehdi 2018).

We start illustrating the functionality of the `BGVAR`

package by using the `eerData`

data set from Feldkircher and Huber (2016). It contains 76 quarterly observations for 43 countries and the period from 1995Q1 to 2013Q4. The euro area (EA) is included as a regional aggregate.

We can load the data by typing

This loads two objects: `eerData`

, which is a list object of length \(N\) (i.e., the number of countries) and `W.trade0012`

, which is an \(N \times N\) weight matrix.

We can have a look at the names of the countries contained in `eerData`

```
## [1] "EA" "US" "UK" "JP" "CN" "CZ" "HU" "PL" "SI" "SK" "BG" "RO" "EE" "LT" "LV"
## [16] "HR" "AL" "RS" "RU" "UA" "BY" "GE" "AR" "BR" "CL" "MX" "PE" "KR" "PH" "SG"
## [31] "TH" "IN" "ID" "MY" "AU" "NZ" "TR" "CA" "CH" "NO" "SE" "DK" "IS"
```

and at the names of the variables contained in a particular country by

`## [1] "y" "Dp" "rer" "stir" "ltir" "tb"`

We can zoom in into each country by accessing the respective slot of the data list:

```
## y Dp rer stir ltir tb poil
## [1,] 4.260580 0.007173874 4.535927 0.0581 0.0748 -0.010907595 2.853950
## [2,] 4.262318 0.007341077 4.483116 0.0602 0.0662 -0.010637081 2.866527
## [3,] 4.271396 0.005394799 4.506013 0.0580 0.0632 -0.007689327 2.799958
## [4,] 4.278025 0.006218849 4.526343 0.0572 0.0589 -0.008163675 2.821479
## [5,] 4.287595 0.007719866 4.543933 0.0536 0.0591 -0.008277170 2.917315
## [6,] 4.301597 0.008467671 4.543933 0.0524 0.0672 -0.009359032 2.977115
```

Here, we see that the global variable, oil prices (`poil`

) is attached to the US country model. This corresponds to the classical GVAR set-up used among others in Pesaran, Schuermann, and Weiner (2004) and Dees et al. (2007). We also see that in general, each country model \(i\) can contain a different set of variables \(k_i\) as opposed to requirements in a balanced panel.

The GVAR toolbox relies on one important *naming convention*, though: It is assumed that neither the country names nor the variable names contain a `.`

The reason is that the program internally has to collect and separate the data more than once and in doing that, it uses the `.`

to separate countries / entities from variables. To give a concrete example, the slot in the `eerData`

list referring to the USA should not be labelled `U.S.A.`

, nor should any of the variable names contain a `.`

The toolbox also allows the user to submit the data as a \(T \times k\) data matrix, with \(k=\sum^N_{i=1} k_i\) denoting the sum of endogenous variables in the system. We can switch from data representation in list form to matrix from by using the function `list_to_matrix`

(and vice versa using `matrix_to_list`

).

To convert the `eerData`

we can type:

For users who want to submit data in matrix form, the above mentioned naming convention implies that the column names of the data matrix have to include the name of the country / entity and the variable name, separated by a `.`

For example, for the converted `eerData`

data set, the column names look like:

```
## [1] "EA.y" "EA.Dp" "EA.rer" "EA.stir" "EA.ltir" "EA.tb" "US.y"
## [8] "US.Dp" "US.rer" "US.stir"
```

In both cases, submitting data as list or as big matrix, the underlying data can be either of `matrix`

class or time series classes such as `ts`

or `xts`

.

Finally, we look at the second important ingredient to build our GVAR model, the weight matrix. Here, we use annual bilateral trade flows (including services), averaged over the period from 2000 to 2012. This implies that The \(ij^{th}\) element of \(W\) contains trade flows from unit \(i\) to unit \(j\). These weights can also be made symmetric by calculating \(\frac{(W_{ij}+W_{ji})}{2}\). Using trade weights to establish the links in the GVAR goes back to the early GVAR literature (Pesaran, Schuermann, and Weiner 2004) but is still used in the bulk of GVAR studies. Other weights, such as financial flows, have been proposed in Eickmeier and Ng (2015) and examined in Feldkircher and Huber (2016). Another approach is to use estimated weights as in Feldkircher and Siklos (2019). The weight matrix should have `rownames`

and `colnames`

that correspond to the \(N\) country names contained in `Data`

.

```
## EA US UK JP CN CZ
## EA 0.0000000 0.13815804 0.16278169 0.03984424 0.09084817 0.037423312
## US 0.1666726 0.00000000 0.04093296 0.08397042 0.14211997 0.001438531
## UK 0.5347287 0.11965816 0.00000000 0.02628600 0.04940218 0.008349458
## JP 0.1218515 0.21683444 0.02288576 0.00000000 0.22708532 0.001999762
## CN 0.1747925 0.19596384 0.02497009 0.15965721 0.00000000 0.003323641
## CZ 0.5839067 0.02012227 0.03978617 0.01174212 0.03192080 0.000000000
## HU PL SI SK BG RO
## EA 0.026315925 0.046355019 0.0088805499 0.0140525286 0.0054915888 0.0147268739
## US 0.001683935 0.001895003 0.0003061785 0.0005622383 0.0002748710 0.0007034870
## UK 0.006157917 0.012682611 0.0009454295 0.0026078946 0.0008369228 0.0031639564
## JP 0.002364775 0.001761420 0.0001650431 0.0004893263 0.0001181310 0.0004293428
## CN 0.003763771 0.004878752 0.0005769658 0.0015252866 0.0006429077 0.0019212312
## CZ 0.025980933 0.062535144 0.0058429207 0.0782762640 0.0027079942 0.0080760690
## EE LT LV HR AL
## EA 0.0027974288 3.361644e-03 1.857555e-03 0.0044360005 9.328127e-04
## US 0.0002678272 4.630261e-04 2.407372e-04 0.0002257508 2.057213e-05
## UK 0.0009922865 1.267497e-03 1.423142e-03 0.0004528439 3.931010e-05
## JP 0.0002038361 9.363053e-05 9.067431e-05 0.0001131534 4.025852e-06
## CN 0.0004410996 5.033345e-04 4.041432e-04 0.0006822057 1.435258e-04
## CZ 0.0009807047 2.196688e-03 1.107030e-03 0.0027393932 1.403948e-04
## RS RU UA BY GE AR
## EA 2.430815e-03 0.06112681 0.0064099317 1.664224e-03 0.0003655903 0.005088057
## US 7.079076e-05 0.01024815 0.0008939856 2.182909e-04 0.0001843835 0.004216105
## UK 2.730431e-04 0.01457675 0.0010429571 4.974630e-04 0.0001429294 0.001387324
## JP 2.951168e-05 0.01725841 0.0007768546 4.392221e-05 0.0001062724 0.001450359
## CN 1.701277e-04 0.02963668 0.0038451574 5.069157e-04 0.0001685347 0.005817928
## CZ 1.638111e-03 0.03839817 0.0082099438 1.447486e-03 0.0002651330 0.000482138
## BR CL MX PE KR PH
## EA 0.018938315 0.0051900915 0.011455138 0.0019463003 0.018602006 0.0034965601
## US 0.020711342 0.0064996880 0.140665729 0.0037375799 0.033586979 0.0076270807
## UK 0.007030657 0.0016970182 0.003832710 0.0005204850 0.010183755 0.0025279396
## JP 0.010910951 0.0077091104 0.011164908 0.0020779123 0.079512267 0.0190560664
## CN 0.025122526 0.0102797021 0.010960261 0.0040641411 0.103135774 0.0150847984
## CZ 0.001898955 0.0002425703 0.001538938 0.0001152155 0.005248484 0.0008790869
## SG TH IN ID MY AU
## EA 0.012319690 0.007743377 0.016629452 0.0065409485 0.009631702 0.010187442
## US 0.017449474 0.012410910 0.014898397 0.0079866535 0.017364286 0.011578348
## UK 0.011309096 0.006146707 0.013461838 0.0032341466 0.006768142 0.012811822
## JP 0.029885052 0.044438961 0.010319951 0.0369586674 0.035612054 0.047921306
## CN 0.029471018 0.024150334 0.024708981 0.0201353186 0.033336788 0.036066785
## CZ 0.002867306 0.003136170 0.003568422 0.0009949029 0.002695855 0.001291178
## NZ TR CA CH NO SE
## EA 0.0017250647 0.028935117 0.012886035 0.065444998 0.025593188 0.041186900
## US 0.0023769166 0.004969085 0.213004968 0.013343786 0.003975441 0.006793041
## UK 0.0022119334 0.013099627 0.020699895 0.026581778 0.033700469 0.022629934
## JP 0.0048098149 0.002560745 0.020149431 0.010014273 0.002895884 0.004375537
## CN 0.0030625686 0.006578520 0.019121787 0.007657646 0.002804712 0.005853722
## CZ 0.0001703354 0.006490032 0.001808704 0.013363416 0.003843421 0.013673889
## DK IS
## EA 0.025035373 1.163498e-03
## US 0.003135419 2.750740e-04
## UK 0.013518119 1.119179e-03
## JP 0.003207880 2.637944e-04
## CN 0.003990731 7.806304e-05
## CZ 0.007521567 1.490167e-04
```

The countries in the weight matrix should be in the same order as in the data list:

`## [1] TRUE`

The weight matrix should be row-standardized and the diagonal elements should be zero:

```
## EA US UK JP CN CZ HU PL SI SK BG RO EE LT LV HR AL RS RU UA BY GE AR BR CL MX
## 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
## PE KR PH SG TH IN ID MY AU NZ TR CA CH NO SE DK IS
## 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
```

```
## EA US UK JP CN CZ HU PL SI SK BG RO EE LT LV HR AL RS RU UA BY GE AR BR CL MX
## 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
## PE KR PH SG TH IN ID MY AU NZ TR CA CH NO SE DK IS
## 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
```

Note that through row-standardizing, the final matrix is typically not symmetric (even when using the symmetric weights as raw input).

In what follows, we restrict the dataset to contain only three countries, `EA`

, `US`

and `RU`

and adjust the weight matrix accordingly. We do this only for *illustrational purposes to save time and storage in this document*:

The main function of the `BGVAR`

package is its `bgvar`

function. The unique feature of this toolbox is that we use Bayesian shrinkage priors with optionally stochastic volatility to estimate the country models in the GVAR. In its current version, three priors for the country VARs are implemented:

- Non-conjugate Minnesota prior (
`MN`

, Litterman 1986; Koop and Korobilis 2010) - Stochastic Search Variable Selection prior (
`SSVS`

, George, Sun, and Ni 2008) - Normal-Gamma prior (
`NG`

, Huber and Feldkircher 2019)

The first two priors are described in more detail in Crespo Cuaresma, Feldkircher, and Huber (2016). For a more technical description of the Normal-Gamma prior see Huber and Feldkircher (2019) and for an application in the GVAR context Feldkircher and Siklos (2019). For the variances we can assume homoskedasticity or time variation (stochastic volatility). For the latter, the library relies on the `stochvol`

package of Kastner (2016).

We start with estimating our toy model using the `NG`

prior, the reduced `eerData`

data set and the adjusted `W.trade0012`

weight matrix:

```
model.1<-bgvar(Data=eerData,
W=W.trade0012,
draws=100,
burnin=100,
plag=1,
prior="NG",
hyperpara=NULL,
SV=TRUE,
thin=1,
trend=TRUE,
h=0,
save.country.store=FALSE,
eigen=1.05
)
```

The default prior specification in `bgvar`

is to use the NG prior with stochastic volatility and one lag for both the endogenous and weakly exogenous variables (`plag=1`

). In general, due to its high cross-sectional dimension, the GVAR can allow for very complex univariate dynamics and it might thus not be necessary to increase the lag length considerably as in a standard VAR (Burriel and Galesi 2018).

The setting `hyperpara=NULL`

implies that we use the standard hyperparameter specification for the NG prior; see the helpfiles for more details. The slots `draws`

and `burnin`

denote the posterior draws and the burn-in draws (i.e., the draws that are discarded). To ensure that the MCMC estimation has converged, a high-number of burn-ins is recommended (say 15,000 to 30,000). Saving the full set of posterior draws can eat up a lot of storage. To reduce this, we can use a thinning interval which stores only a thin\(^{th}\) draw of the global posterior output. For example, with `thin=10`

and `draws=5000`

posterior draws, the amount of MCMC draws stored is 500. `TREND=TRUE`

implies that the model is estimated using a trend. Note that regardless of the trend specification, each equation always automatically includes an intercept term. To speed up computation, it is possible to set `cores`

to the number of CPU cores to use.. The package then detects the used platform and either invokes `parLapply`

(Windows platform) or `mclapply`

(non-Windows platform). If `cores=NULL`

then `lapply`

is used. In case the user wants to specify its own apply function, this is also possible by passing it to the argument `applyfun`

. Ideally the number of cores is equal to the number of units \(N\). In addition to storing the global posterior, we could also be interested in inspecting the output of the \(N\) country models in more detail. To do so, we could set `save.country.store=TRUE`

allows to save the whole posterior distribution of the single country models, in the case we would like to inspect them. Due to storage reasons, the default is set to `FALSE`

and only the posterior medians of the single country models are reported. Note that even in case `save.country.store=FALSE`

, the whole posterior distribution of the is reported.

With have estimated the above model with stochastic volatility (`SV=TRUE`

). There are several reasons why one may want to let the residual variances change over time. First and foremost, most time periods used in macroeconometrics are nowadays rather volatile including severe recessions. Hence accounting for time variation might improve the fit of the model (Primiceri 2005; Sims and Zha 2006; Dovern, Feldkircher, and Huber 2016; Huber 2016). Second, the specification implemented in the toolbox nests the homoskedastic case. It is thus a good choice to start with the more general case when first confronting the model with the data. For structural analysis such as the calculation of impulse responses, we take the variance covariance matrix with the median volatilities (over the sample period) on its diagonal. If we want to look at the volatilities of the first equation (`y`

) in the euro area country model, we can type:

To discard explosive draws, we can compute the eigenvalues of the reduced form of the global model, written in its companion form. Unfortunately, this can only be done once the single models have been estimated and stacked together (and hence not directly built into the MCMC algorithm for the country models). To discard draws that lead to higher eigenvalues than 1.05 set `eigen=1.05`

. We can look at the 10 largest eigenvalues by typing:

```
## [1] 1.0331308 1.0134809 1.0064802 1.0446133 1.0469255 1.0090341 1.0238809
## [8] 0.9935661 1.0154749 0.9671964
```

Last, we have used the default option `h=0`

, which implies that we use the full sample period to estimate the GVAR. For the purpose of forecast evaluation, `h`

could be specified to a positive number, which then would imply that the last `h`

observations are reserved as a hold-out sample and not used to estimate the model.

Having estimated the model, we can have summarize the outcome in various ways.

First, we can use the`print`

method
```
## ---------------------------------------------------------------------------------------
## Model Info:
## Prior: NG
## Nr. of lags: 1
## Nr. of posterior draws: 100/1=100
## Size of GVAR object: 1.1 Mb
## Trimming leads to 92 (92%) stable draws out of 100 total draws
## ---------------------------------------------------------------------------------------
## Model specification:
##
## EA: y, Dp, rer, stir, ltir, tb, y*, Dp*, rer*, stir*, ltir*, tb*, poil**, trend
## US: y, Dp, rer, stir, ltir, tb, poil, y*, Dp*, rer*, stir*, ltir*, tb*, trend
## RU: y, Dp, rer, stir, tb, y*, Dp*, rer*, stir*, ltir*, tb*, poil**, trend
```

This just prints the submitted arguments of the `bgvar`

object along with the model specification for each unit. The asterisks indicate weakly exogenous variables, double asterisks exogenous variables and variables without asterisks the endogenous variables per unit.

The `summary`

method is a more enhanced way to analyze the output. It computes descriptive statistics like convergence properties of the MCMC chain, serial autocorrelation in the errors and the average pairwise autocorrelation of cross-unit residuals.

```
## -------------------------------------------------------------------------------
## Model Info:
## Prior: NG
## Nr. of lags: 1
## Nr. of posterior draws: 100/1=100
## Number of stable posterior draws: 92
## Number of countries: 3
## -------------------------------------------------------------------------------
## Convergence diagnostics
## Geweke statistic:
## 123 out of 1656 variables' z-values exceed the 1.96 threshold (7.43%)
## -------------------------------------------------------------------------------
## Global Likelihood: 4225.95
## F-test, first order serial autocorrelation of cross-country residuals
## Summary statistics:
## ========= ========== ======
## \ # p-values in %
## ========= ========== ======
## >0.1 6 33.33%
## 0.05-0.1 2 11.11%
## 0.01-0.05 3 16.67%
## <0.01 7 38.89%
## ========= ========== ======
## -------------------------------------------------------------------------------
## Average pairwise cross-country correlation of country model residuals
## Summary statistics:
## ======= ========== ========== ========== ========== ======== ==========
## \ y Dp rer stir ltir tb
## ======= ========== ========== ========== ========== ======== ==========
## <0.1 0 (0%) 2 (66.67%) 2 (66.67%) 1 (33.33%) 2 (100%) 2 (66.67%)
## 0.1-0.2 1 (33.33%) 1 (33.33%) 1 (33.33%) 2 (66.67%) 0 (0%) 1 (33.33%)
## 0.2-0.5 2 (66.67%) 0 (0%) 0 (0%) 0 (0%) 0 (0%) 0 (0%)
## >0.5 0 (0%) 0 (0%) 0 (0%) 0 (0%) 0 (0%) 0 (0%)
## ======= ========== ========== ========== ========== ======== ==========
## -------------------------------------------------------------------------------
```

We can now have a closer look at the information provided by `summary`

. The header contains some basic information about the prior used to estimate the model, how many lags, posterior draws and countries. The next line shows Geweke’s CD statistic, which is calculated using the `coda`

package. Geweke’s CD assesses practical convergence of the MCMC algorithm. In a nutshell, the diagnostic is based on a test for equality of the means of the first and last part of a Markov chain (by default we use the first 10% and the last 50%). If the samples are drawn from the stationary distribution of the chain, the two means are equal and Geweke’s statistic has an asymptotically standard normal distribution.

The test statistic is a standard Z-score: the difference between the two sample means divided by its estimated standard error. The standard error is estimated from the spectral density at zero and so takes into account any autocorrelation. The test statistic shows that only a small fraction of all coefficients did not convergence. Increasing the number of burn ins can help decreasing this number further. The statistic can also be calculated by typing `conv.diag(model.1)`

.

The next model statistic is the likelihood of the global model. This statistic can be used for model comparison. Next and to assess, whether there is first order serial autocorrelation present, we provide the results of a simple F-test. The table shows the share of p-values that fall into different significance categories. Since the null hypothesis is that of no serial correlation, we would like to have as many large (\(>0.1\)) p-values as possible. The statistics show that already with one lag, serial correlation is modest in most equations’ residuals. This could be the case since we have estimated the unit models with stochastic volatility. To further decrease serial correlation in the errors, one could increase the number of lags via `plag`

.

The last part of the summary output contains a statistic of cross-unit correlation of (posterior median) residuals. One assumption of the GVAR framework is that of negligible, cross-unit correlation of the residuals. Significant correlations prohibit structural and spillover analysis (Dees et al. 2007). In this example, correlation is reasonably small.

Some other useful methods the `BGVAR`

toolbox offers contain the `coef`

(or `coefficients`

as its alias) methods to extract the \(k \times k \times plag\) matrix of reduced form coefficients of the global model. Via the `vcov`

command, we can access the global variance covariance matrix and the `logLik()`

function allows us to gather the global log likelihood (as provided by the `summary`

command).

Last, we can have a quick look at the in-sample fit using either the posterior median of the country models’ residuals (`global=FALSE`

) or those of the global solution of the GVAR (`global=TRUE`

). The in-sample fit can also be extracted by using `fitted()`

.

Here, we show the in-sample fit of the euro area model (`global=FALSE`

).

We can estimate the model with two further priors on the unit models, the SSVS prior and the Minnesota prior. To give a concrete example, the SSVS prior can be invoked by typing:

```
model.ssvs.1<-bgvar(Data=eerData,
W=W.trade0012,
draws=100,
burnin=100,
plag=1,
prior="SSVS",
hyperpara=NULL,
SV=TRUE,
thin=1,
trend=TRUE,
h=0,
save.country.store=FALSE,
eigen=1.05
)
```

One feature of the SSVS prior is that it allows to look at the posterior inclusion probabilities to gauge the importance of particular variables. For example, we can have a look at the PIPs of the euro area model by typing:

```
## y Dp rer stir ltir tb
## y_lag1 1.00 0.53 0.17 0.08 0.05 0.28
## Dp_lag1 0.31 0.73 0.16 0.13 0.91 0.13
## rer_lag1 0.78 0.48 1.00 1.00 0.15 0.79
## stir_lag1 0.86 0.97 0.63 1.00 0.25 0.29
## ltir_lag1 0.81 0.18 0.38 0.33 1.00 0.78
## tb_lag1 0.22 1.00 0.88 0.19 0.17 1.00
## y* 1.00 0.51 0.13 0.09 0.06 0.22
## Dp* 0.22 0.76 0.31 0.06 0.27 0.33
## rer* 0.16 0.22 1.00 0.16 0.12 0.39
## stir* 0.18 1.00 0.10 0.16 0.19 0.39
## ltir* 0.08 0.52 0.28 0.99 0.17 0.15
## tb* 0.21 1.00 0.29 0.50 0.13 0.29
## poil** 0.49 1.00 0.27 0.12 0.16 0.26
## y*_lag1 0.33 0.67 0.09 0.16 0.05 0.19
## Dp*_lag1 0.10 0.25 0.14 0.21 0.78 0.20
## rer*_lag1 0.50 0.73 0.98 0.40 0.09 0.28
## stir*_lag1 0.44 0.26 0.21 0.73 0.22 0.62
## ltir*_lag1 1.00 1.00 0.36 1.00 0.52 0.03
## tb*_lag1 0.17 0.33 0.95 0.67 0.06 0.45
## poil**_lag1 0.62 0.63 0.46 0.21 0.16 0.22
## cons 0.13 1.00 0.92 0.21 0.08 0.54
## trend 0.76 0.34 0.19 0.16 0.08 0.52
```

This prints in the columns, the equations in the EA country model and in the rows the included variables. The example shows that besides other variables, the trade balance (`tb`

) is an important determinant of the real exchange rate (`rer`

).

We can also have a look at the average of the PIPs across all units:

```
## y Dp rer stir ltir tb poil
## y_lag1 1.0000000 0.2233333 0.3866667 0.2966667 0.165 0.5066667 0.07
## Dp_lag1 0.3733333 0.8866667 0.1566667 0.1766667 0.550 0.2666667 0.98
## rer_lag1 0.5966667 0.3333333 1.0000000 0.5266667 0.385 0.6066667 0.12
## stir_lag1 0.8666667 0.4766667 0.3966667 1.0000000 0.350 0.2233333 0.34
## ltir_lag1 0.6300000 0.1450000 0.5000000 0.1950000 1.000 0.5100000 0.26
## tb_lag1 0.2466667 0.4033333 0.3700000 0.4900000 0.155 1.0000000 0.17
## y* 0.5466667 0.1866667 0.1000000 0.0800000 0.080 0.3266667 0.07
## Dp* 0.2566667 0.6500000 0.3533333 0.1533333 0.490 0.4600000 1.00
## rer* 0.2333333 0.2433333 0.7100000 0.1400000 0.460 0.2466667 0.30
## stir* 0.2266667 0.4733333 0.1733333 0.3100000 0.220 0.3966667 0.06
## ltir* 0.2366667 0.4300000 0.3033333 0.4800000 0.130 0.1400000 0.19
## tb* 0.3666667 0.5466667 0.2933333 0.2633333 0.205 0.3300000 0.07
## poil** 0.7450000 0.5450000 0.2000000 0.2350000 0.160 0.1950000 NaN
## y*_lag1 0.2766667 0.2500000 0.3066667 0.3433333 0.240 0.2200000 0.09
## Dp*_lag1 0.1366667 0.2100000 0.1533333 0.1333333 0.570 0.3300000 0.19
## rer*_lag1 0.3366667 0.4066667 0.7133333 0.1900000 0.545 0.2100000 0.41
## stir*_lag1 0.5166667 0.2333333 0.3033333 0.4200000 0.185 0.4633333 0.16
## ltir*_lag1 0.4133333 0.3833333 0.3133333 0.4100000 0.305 0.2300000 0.31
## tb*_lag1 0.1600000 0.1833333 0.4700000 0.2966667 0.085 0.2266667 0.19
## poil**_lag1 0.4450000 0.3800000 0.3450000 0.1600000 0.160 0.1300000 NaN
## cons 0.3100000 0.4033333 0.8900000 0.3700000 0.130 0.4100000 0.09
## trend 0.3533333 0.1500000 0.2700000 0.4633333 0.190 0.4100000 1.00
## poil_lag1 0.1600000 0.1900000 0.3600000 1.0000000 0.310 0.5400000 1.00
```

This shows that the same determinants for the real exchange rate appear also as important regressors in other country models.

In this section we explore different specifications of the structure of the GVAR model. Other, specification choices that relate more to the time series properties of the data, such as specifying different lags and priors are left for the reader to explore. We will use the SSVS prior and judge the different specifications by examining the posterior inclusion probabilities.

As a first modification, we could use different weights for different variable classes as proposed in Eickmeier and Ng (2015). For example we could use financial weights to construct weakly exogenous variables of financial factors and trade weights for real variables.

The `eerData`

set provides us with a list of different weight matrices that are described in the help files.

Now we specify the sets of variables to be weighted:

```
eerData2<-eerData
variable.list<-list();variable.list$real<-c("y","Dp","tb");variable.list$fin<-c("stir","ltir","rer")
```

We can then re-estimate the model:

```
# weights for first variable set tradeW.0012, for second finW0711
model.ssvs.2<-bgvar(Data=eerData2,
W=W.list[c("tradeW.0012","finW0711")],
plag=1,
draws=100,
burnin=100,
prior="SSVS",
SV=TRUE,
thin=1,
hyperpara=NULL,
eigen=TRUE,
variable.list=variable.list,
OE.weights=NULL,
Wex.restr=NULL,
trend=TRUE,
save.country.store=FALSE
)
```

Another specification would be to include a foreign variable only when its domestic counterpart is missing. For example, when working with nominal bilateral exchange rates we probably do not want to include also its weighted average (which corresponds to something like an effective exchange rate). Using the previous model we could place a restriction on long-term interest rates, since those are not contained in all country models.

```
# does include ltir* only when ltir is missing domestically
model.ssvs.3<-bgvar(Data=eerData,
W=W.trade0012,
plag=1,
draws=100,
burnin=100,
prior="SSVS",
SV=TRUE,
thin=1,
hyperpara=NULL,
eigen=TRUE,
variable.list=NULL,
OE.weights=NULL,
Wex.restr="ltir",
trend=TRUE,
save.country.store=FALSE
)
```

```
## ---------------------------------------------------------------------------------------
## Model Info:
## Prior: SSVS
## Nr. of lags: 1
## Nr. of posterior draws: 100/1=100
## Size of GVAR object: 1.1 Mb
## Trimming leads to 90 (90%) stable draws out of 100 total draws
## ---------------------------------------------------------------------------------------
## Model specification:
##
## EA: y, Dp, rer, stir, ltir, tb, y*, Dp*, rer*, stir*, tb*, poil**, trend
## US: y, Dp, rer, stir, ltir, tb, poil, y*, Dp*, rer*, stir*, tb*, trend
## RU: y, Dp, rer, stir, tb, y*, Dp*, rer*, stir*, ltir*, tb*, poil**, trend
```

Last, we could also use a different specification of oil prices in the model. Currently, the oil price is determined endogenously within the US model. Alternatively, one could set up an own standing oil price model with additional variables that feeds the oil price back into the other economies as exogenous variable (Mohaddes and Raissi 2019).

The model structure would then look something like in the Figure below:

For that purpose we have to remove oil prices from the US model and attach them to a separate slot in the data list. This slot has to have its own country label. We use ‘OC’ for “oil country”.

```
eerData2$OC<-eerData$US[,c("poil"),drop=FALSE] # move oil prices into own slot
eerData2$US<-eerData$US[,c("y","Dp", "rer" , "stir", "ltir","tb")] # exclude it from US m odel
```

Now we have to specify a list object that we label `OC.weights`

. The list has to consist of three slots with the following names `weights`

, `variables`

and `exo`

:

```
OC.weights<-list()
OC.weights$weights<-rep(1/3, 3)
names(OC.weights$weights)<-names(eerData2)[1:3] # last one is OC model, hence only until 3
OC.weights$variables<-c(colnames(eerData2$OC),"y") # first entry, endog. variables, second entry weighted average of y from the other countries to proxy demand
OC.weights$exo<-"poil"
```

The first slot, `weights`

, should be a vector of weights that sum up to unity. In the example above, we simply use \(1/N\), other weights could include purchasing power parities (PPP). The weights are used to aggregate specific variables that in turn enter the oil model as weakly exogenous. The second slot, `variables`

, should specify the names of the endogenous and weakly exogenous variables that are used in the model. In the oil price example, we include the oil price (`poil`

) as endogenous variable (not contained in any other country model); a weighted average using `weights`

of output (`y`

) to proxy world demand is included as weakly exogenous variable. Last, we specify via `exo`

which one of the endogenous variables of the oil price model are fed back into the other country models. In this example we specify `poil`

. Last, we include `OC.weights`

in a further list called `OE.weights`

(other entity weights):

where the list entry has to has the same name as the oil country model, in our example `OC`

. Note that specifying `OE.weights`

in principle allows to include further “extra” country models by simply adding additional list slots.

Now we can re-estimate the model by specifying `OE.weights`

, which is a list with its entries labelled exactly like the additional country models. The structure is designed to also allow for more than one other entity (henceforth labelled OE).

```
model.ssvs.4<-bgvar(Data=eerData2,
W=W.trade0012,
plag=1,
draws=100,
burnin=100,
prior="SSVS",
SV=TRUE,
thin=1,
hyperpara=NULL,
variable.list=NULL,
OE.weights=OE.weights,
trend=TRUE,
save.country.store=FALSE
)
```

and can compare the results of the four models by e.g., looking at the average PIPs.

```
aux1<-model.ssvs.1$cc.results$PIP$PIP.avg;aux1<-aux1[-nrow(aux1),1:6]
aux2<-model.ssvs.2$cc.results$PIP$PIP.avg;aux2<-aux2[-nrow(aux2),1:6]
aux3<-model.ssvs.3$cc.results$PIP$PIP.avg;aux3<-aux3[-nrow(aux3),1:6]
aux4<-model.ssvs.4$cc.results$PIP$PIP.avg;aux4<-aux4[-nrow(aux4),1:6]
```

```
heatmap(aux1,Rowv=NA,Colv=NA, main="Model 1")
heatmap(aux2,Rowv=NA,Colv=NA, main="Model 2")
heatmap(aux3,Rowv=NA,Colv=NA, main="Model 3")
heatmap(aux4,Rowv=NA,Colv=NA, main="Model 4")
```

We could also compare the models based on their fit, the likelihood, information criteria such as the DIC, residual properties or their forecasting performance.

Structural analysis can be performed by invoking the `irf()`

function. This function calculates three alternative ways of dynamic responses, namely generalized impulse response functions (GIRFs) as in Pesaran and Shin (1998), orthogonalized impulse response functions using a Cholesky decomposition and finally impulse response functions given a set of user-specified sign restrictions.

Let us start by looking at a monetary policy shock in the US country model. We have to set up a list `shock`

that contains information about which variable we want to shock `shocks$var`

, in which country `shocks$cN`

and whether we want a recursive identification or GIRFs `shocks$ident`

. We can also scale the shock using `shocks$scal`

. If the argument `cores`

is set to to a number, computation is sped up by using multiple CPU cores. The package attempts to detect the number of cores on the computer, which it uses then for parallel computing. Default is set to `FALSE`

to not slow down the computer.

```
# US monetary policy shock
shocks<-list();shocks$var="stir";shocks$cN<-"US";shocks$ident="chol";shocks$scal=-100
irf.chol.us.mp<-irf(model.ssvs.1,shock=shocks,n.ahead=24,save.store=TRUE)
```

The results are stored in `irf.chol.us.mp`

.

```
## [1] "posterior" "rot.nr" "shock" "sign.constr" "ident"
## [6] "struc.obj" "model.obj" "IRF_store"
```

`irf.chol.us.mp$posterior`

is a \(K \times n.ahead \times nr.of shocks \times 7\) object. The last slot contains the 50%, 68% and 95% credible intervals along the posterior median. If `save.store=TRUE`

, `IRF_store`

contains the full set of impulse response draws.

We can plot the complete responses of a particular country by typing:

The plot shows the posterior median response (solid, black line) along 50% (dark grey) and 68% (light grey) credible intervals.

We can also compare the Cholesky responses with GIRFs. For that purpose, let us look at a GDP shock.

```
# Recursive US GDP
shocks<-list();shocks$var="y";shocks$cN<-"US";shocks$ident="chol";shocks$scal=-1
irf.chol.us.y<-irf(model.ssvs.1,shock=shocks,n.ahead=24)
# GIRF US GDP
shocks<-list();shocks$var="y";shocks$cN<-"US";shocks$ident="girf";shocks$scal=-1
irf.girf.us.y<-irf(model.ssvs.1,shock=shocks,n.ahead=24)
```

```
plot(irf.chol.us.y,resp="US.y")
plot(irf.girf.us.y,resp="US.y")
plot(irf.chol.us.y,resp="US.rer")
plot(irf.girf.us.y,resp="US.rer")
```